Compositional design,structure stability,and microwave dielectric properties in Ca3MgBGe3O12 (B = Zr,Sn) garnet ceramics with tetravalent cations on B-site

Two garnet-structured Ca₃MgBGe₃O₁₂ (B = Zr, Sn) ceramics with tetravalent cations at B-site were prepared by conventional solid state reaction. The crystal structure, microstructure evolution, and microwave dielectric performance were investigated using X-ray powder diffraction, Rietveld refinement, scanning electron microscopy, Raman spectroscopy, and infrared spectroscopy techniques. Dense Ca₃MgZrGe₃O₁₂ and Ca₃MgSnGe₃O₁₂ ceramics were obtained at sintering temperatures of 1420 and 1400 °C, respectively. The dielectric constant, unloaded quality factor, and temperature coefficient of resonance frequency of Ca₃MgZrGe₃O₁₂ were 10.80 ± 0.2; 79,600 ± 1000 GHz (f = 12.61 GHz); and ?66.8 ± 1 ppm/°C, respectively, and the corresponding values for Ca₃MgSnGe₃O₁₂ were 9.68 ± 0.2; 83,400 ± 1000 GHz (f = 14.19 GHz); and ?57.9 ± 1 ppm/°C, respectively. The dielectric performances of the two ceramics were compared by analyzing the ionic polarizability, packing fraction, and bond valence. The intrinsic dielectric properties were predicted by fitting the infrared reflectivity spectra.     

Chemical bond characteristics and infrared reflectivity spectrum of a novel microwave dielectric ceramic CaIn2O4 with near-zero τf

Orthorhombic-structured CaIn₂O₄ ceramics with a space group Pca2₁ were synthesized via a solid-state reaction method. A high relative density (95.6 %) and excellent microwave dielectric properties (ε_r ～11.28, Qf = 74,200 GHz, τ_f ～ ?4.6 ppm/°C) were obtained when the ceramics were sintered at 1375 °C for 6 h. The dielectric properties were investigated on the basis of the Phillips–Van Vechten–Levine chemical bond theory. Results indicated that the dielectric properties were mainly determined by the InO bonds in the CaIn₂O₄ ceramics. These bonds contributed more (74.65 %) to the dielectric constant than the CaO bonds (25.35 %). Furthermore, the intrinsic dielectric properties of the CaIn₂O₄ ceramics were investigated via infrared reflectivity spectroscopy. The extrapolated microwave dielectric properties were ε_r ～10.12 and Qf = 112,200 GHz. Results indicated that ion polarization is the main contributor to the dielectric constant in microwave frequency ranges.     

栈式降噪自编码器在波形单元识别中的应用

为提高多功能雷达(Multi-Function Radar,MFR)波形单元的识别准确率和鲁棒性,提出一种栈式降噪自编码器(Stacked Denoising Autoencoders,SDAE)与支持向量机(Support Vector Machine,SVM)相结合的波形单元识别方法.首先摒弃传统依赖脉冲序列分析技术对MFR信号进行处理的方法,通过分析波形单元结构并借助参数间的联合变化特征,提出一种MFR波形单元分段识别模型,将传统对脉冲序列的识别转化为对MFR波形单元的识别;然后在该模型的基础上引入SDAE,对训练样本数据、SDAE隐含层神经元节点进行加噪处理,并利用这些加噪后的样本数据训练优化SDAE网络模型,提取出样本数据的深层稳健特征;最后引入SVM算法,借助SDAE挖掘出的样本深层特征,实现SVM模型的优化,得到最终的波形单元识别模型(SDAE-SVM).仿真实验表明:提出的波形单元识别方法在相同样本数目和测试误差的条件下,与SVM算法相比,能够取得较高的识别准确率,具备更优越的识别效果.证实MFR波形单元识别模型是有效的,且通过SDAE网络的引入,使得SDAE-SVM方法能够自主地挖掘原始信号的深层特征,提高波形单元识别的鲁棒性和准确率.     

Data erasure in Fabry–Perot Diode Lasers: effects of facet reflectivity

ABSTRACT

In this study, the effects of facet reflectivity on the data erasure ability of injection-locked Fabry Perot Laser Diode (FPLD), based on a remodulation method in wavelength division multiplexed passive optical network (WDM PON), were investigated. For this purpose, the feasible front facet reflectivity of FPLD was determined as between 0.2% and 7%, depending on the specified injected power interval. Firstly, the system carried out analysis without applying data at the user end to comprehensively demonstrate how much downstream data was completely erased in FPLD. Then, 2.5 Gb/s of non-return-to-zero (NRZ) data was applied and the results compared with the erased downstream signal without data. The results show that upstream transmission improved with an increase in facet reflectivity between 0.2% and 7%.     

混合型开槽同轴布喇格结构的比较研究

基于电磁仿真软件(Computer Simulation Technology,CST)平台,对几种不同开槽形状同轴布喇格结构的频率响应特性分别进行了数值模拟比较研究.结果表明:三角形开槽带宽最窄而矩形开槽带宽最宽;交替混合型开槽时耦合模式的反射率明显提高,而分半混合型开槽时不仅耦合模式的反射率提高,且其带宽也明显变宽,但两种开槽方式时工作模式的反射率和带宽都位于单一开矩形槽和三角形槽之间;叠加混合型开槽克服了单一矩形槽和三角形槽存在奇点和边界突变的缺点,对模式的选择性能优于矩形开槽,反射率和带宽又大于正弦开槽和三角形开槽,仅其谐振频率点有偏移.这些特点有利于同轴布喇格结构的模式选择、散热和工业生产.     

添加钇对 Pt-5Cu 合金组织结构和性能的影响

采用真空电弧熔炼方法制备了Pt-5Cu、Pt-4.9Cu-0.10Y和Pt-0.48Cu-0.20Y合金。利用X射线衍射仪(XRD)、金相显微镜、显微硬度仪及分光光度计等研究了Pt-Cu及Pt-Cu-Y合金的物相组成、显微组织结构、力学性能及反射率。结果表明，钇对Pt-Cu合金的相结构无明显影响，当钇的添加量为0.20%时，Pt-Cu合金的晶粒尺寸显著细化，晶粒的平均尺寸由约150 μm降至约80 μm；细晶强化使Pt-Cu合金的维氏硬度显著增加到165；在可见光波段内，Pt-Cu及Pt-Cu-Y合金的反射率无明显差别。     

纤维增强外保温复合墙体的研究与实践

近十年来，北京地区采用聚苯乙烯泡沫塑料和水泥聚苯板纤维增强的外墙外保温复合墙体总面积已达３０万ｍ２以上。本文介绍了北京市建筑设计研究院和冶金部建筑研究总院合作开发的此两种保温材料的外墙外保温复合墙体的设计、施工技术以及复合墙体的技术性能和技术经济分析。     

压缩感知合成孔径雷达射频干扰抑制方法

压缩感知合成孔径雷达成像技术能够利用少量采样数据恢复目标图像,大大减少数据存储系统的负担,但受到射频干扰时成像品质会严重下降;在目标场景稀疏条件下,分别构建目标回波信号原子库和射频干扰原子库,设计了压缩域合成孔径雷达成像射频干扰抑制算法,并对该算法进行理论分析,最终通过仿真实验验证了算法的有效性;仿真结果表明：该算法在较大干信比条件下,能有效抑制合成孔径雷达射频干扰,达到较好的成像效果。     

雷达导引头最优控制问题研究

建立雷达导引头角跟踪控制数学模型,运用最优控制理论推导天线控制指令;基于机动目标当前统计模型,运用卡尔曼滤波及多普勒跟踪速度修正信息,估计出天线最优控制状态量;经仿真验证,设计方法不仅能够改善制导律输入精度,同时能够提高雷达导引头的响应性能.     

探地雷达在路面厚度无损检测中的应用

介绍了探地雷达检测路面厚度的基本原理、厚度计算方法和探地雷达对路面结构层厚度检测的过程,根据传统检测方法和运用探地雷达检测结果的比对,证明了探地雷达检测路面厚度在实际中是切实可行的。